Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGING
1. Insert the product charger into the shaver (Fig 4).
2. Plug in the charger.
3. The charge indicator lights up (Fig 5).
4. After the full charge, unplug the charger and also pull out the product's
plug from the shaver.
5. It can charge with the charging base.
HOW TO USE PRODUCT
Shaving
1. Press the button ON/OFF to start the shaver.
2. Make the shaver head part move quickly on the skin in straight lines and
circles (Fig 6).
3. Cover the shaver's protective cover after each use to avoid being damaged
(Fig 7).
Trimming
Used for Trimming Temple and Mustache.
1. Push the slide face upwards to open the hair trimmer, which can be started
as the shaver start (Fig 8). To ensure a better shaving effect, the shaver must
be cleaned regularly. The easiest and most sanitary way to clean the product
is to wash the shaver head part and the whisker storeroom with water each
time after using it.
Do be careful when using hot water.
Do remember to check the water is not too hot to avoid doing harm to hands.
1. Stop the shaver (Fig 9).
2. Pull away the four shaver heads on the side one by one and then rotate and
pull out the middle head in the arrow direction indicated on it.
3. Clean the Five shaver head part and the hair storeroom for some time with
hot running water (Fig 10). Make sure the inside of both the shaver head part
and the hair storeroom has been cleaned thoroughly.
4. Wash the product's surface (Fig 11).
5. Close the shaver head part and throw off surplus water.
Do not wipe the shaver head part with atowel or paper tissues, which may
cause damages to the shaver head.
- 10 -
Publicidad
