Using The Self-Timer; Setting Exposure Compensation - Easypix MovieCam SD III Manual De Instrucciones

Using the self-timer

1.
While in Digital Camera mode, press the Menu button
to bring up the Camera menu.
2.
Highlight the SelfTimer item,
and then select ON in the
sub-menu. Then press the
Menu button to exit.
3.
When the Shutter/Record button is pressed, the
camera will have ten seconds delay before taking a
picture. After the shutter fires, the SelfTimer will be
automatically disabled.
Camera
Strobe
AUTO
ImageSize
2M
SelfTimer
ON
DateStamp
OFF
Display
OFF
10
~ 19 ~

Setting exposure compensation

Setting the EV value enables you to manually control the
brightness of the taken stills.
1.
Press the Menu button to bring up the Camera menu.
Highlight the Camera tab, and press the Right button
to select the Advanced tab.
2.
Highlight the Exposure item,
and then select a desired EV
value in the sub-menu. The
larger the number is, the
brighter the stills will be.
Setting the value too high may cause the pictures to appear
over-exposed.
Advanced
Quality
Fine
Exposure
0
WB
AUTO