Automatic Switch-Off; Technical Data; Orbital-Action Jig Saw - Hilti SJT 6-A22 Manual Del Usuario

3.9

Automatic switch-off

If the on/off switch is pressed continuously for longer than 15 minutes (e.g. during transport or storage), the
tool switches itself off automatically. This prevents deep discharge of the battery.
3.10 Items supplied
Orbital-action jig saw with saw blade, guard, dust removal adapter, anti-splinter insert, operating instructions,
hex key.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4

Technical data

4.1

Orbital-action jig saw

Rated voltage
Weight in accordance with EPTA Procedure 01 including B22⁄8.0 battery
Stroke length
Stroke rate under no load (n
Maximum cutting performance in wood
Maximum cutting performance in aluminium
Maximum cutting performance in unalloyed steel
Cutting angle (left/right)
Suction adapter outside diameter
Storage temperature
Ambient temperature for operation
Battery charging starting temperature
Storage temperature
Ambient temperature for operation
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
*2150255*
)
0
)
)
WA
)
pA
)
pA
2150255
SJT 6-A22
21.6 V
3.2 kg
28 mm
800 /min ... 3,000 /min
150 mm
25 mm
10 mm
0° ... 45°
27.5 mm
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
−10 ℃ ... 45 ℃
−20 ℃ ... 40 ℃
−17 ℃ ... 60 ℃
SJT 6-A22
100 dB(A)
5 dB(A)
89 dB(A)
5 dB(A)
English 19