Faber PRETTY ISOLA ACT Manual De Instrucciones página 12

CONNECTION OF MOTOR UNIT/HOOD
• Remove the Grease filters from the Hood
Canopy 1.
• From inside the Hood canopy, screw the
Motor unit 3 to the Hood canopy 1 using 6
Screws 12f provided.
• Make the electrical connections between
the Motor Unit 3 and the Hood Canopy 1,
connecting the Controls connector and the
Lighting connector.
Warning: Make sure that the Connectors
are properly inserted into the housing.
Warning: There will be a specific
Connector according to the type of controls.
• Replace the metal grease filters.
EN
Lux
Cmd
1
12