Navigation Keys; View The Functioning Modes - LEGRAND 6830 31 Manual De Uso

Introduction and standard functions
■
Your Chronothermostat: use it now!
First activation
To enable the Chronothermostat:
• select the functioning Language
• set Date / Time
• the Chronothermostat automatically sets to Winter mode and Week-
ly PROGRAMME1 mode.
The display shows the currently set selection.
(Italian factory setting)
• The ÅÇ keys can be used to scroll the list and select the language
• Press OK to confi rm
After confirming, the Chronothermostat switches to the Set DATE and
TIME menu
• Set time and date with keys: ÅÇ increases/decreases the selected
digit, ÉÑ scrolls the time and date digits
• Press OK to confi rm
• Hold down the C key to exit the menu and return to the main page
The Chronothermostat will automatically set up as follows:
- Winter mode
- Weekly-PROGRAMME1 mode
To set the Summer mode
• press OK to access the menus
• select Setup with theÇkey
• press OK to confi rm
Complete the setup by following the procedure described on pag. 25.
Daylight saving time: if the default setup is kept, "Manual" must
be updated manually; to set up the "Automatic" update mode,
see paragraph "Set Daylight saving time" on pag. 25.

Navigation keys

When the main screen is displayed, the following operations can be
executed with the navigation keys:
OK Key accesses the Main menu - confi rm
C Key cancels and returns to the previous mode
ÅÇKeys
depending on the preset mode:
Weekly – Manual – Timed: increase / decrease in the current
temperature;
Holidays – Antifreeze – OFF: no eff ect
ÉÑKeys
cycle through the functioning modes

View the functioning modes

When the Chronothermostat display shows the Screen saver (or when
it is off ), the preset functioning mode will be displayed if any key is
pressed.
22