Scroll The Modes; Change The Weekly Mode; Change The Manual Mode; Change The Holidays Mode - LEGRAND 6830 31 Manual De Uso

Scroll the modes

When the Chronothermostat display shows the Screen saver (or when
it is off ), the preset functioning mode will be displayed if any key is
pressed.
• Use the ÉÑ keys to view the other modes: Weekly, Manual, Holidays,
Timed, Antifreeze and Off .
The name of the selected mode fl ashes to indicate the modifi cation status:
if it is not confi rmed (by pressing OK) or, if a key is not pressed for more
than 10 seconds, the operation will be cancelled, thus displaying the main
screen with the current mode.
To set the functioning mode displayed:
• Use the OK key to confi rm
the Chronothermostat is now working under the new mode.
Depending on the mode selected, the following modifi cation functions
will be possible.

Change the Weekly mode

• Use the ÉÑ keys to select the "Weekly" mode
The number of the operative programme fl ashes as well as the square cor-
responding to the time.
• Use the ÅÇ keys to scroll the three programmes and to display the
daily profi le.
Select the required programme; when the number of the programme stops
fl ashing, it will be possible to change the level of the current temperature.
• Use the ÅÇ keys to select the level of the required temperature.
The profi le displayed, starting from the fl ashing square, will be modifi ed with
the new temperature level, until the next level is changed.
• Use the OK key to confi rm
Introduction and standard functions

Change the Manual mode

• Use the ÉÑ keys to select the "Manual" mode.
• Use the ÅÇ keys to increase or decrease the value of the preset tem-
perature.
• Use the OK key to confi rm
or
the C key to cancel and return to the previous mode.
The Chronothermostat is now working under the new preset mode.

Change the Holidays mode

• Use the ÉÑ keys to select the "Holidays" mode.
• Use the OK key to confi rm
When confi rming, the Holidays Mode setup menu will be displayed;
• Use the ÉÑ and ÅÇ keys to set the time and data:
ÅÇ increases/decreases the selected digit
ÉÑ scrolls the time and date digits
• Use the OK key to confi rm
• Use the ÅÇ keys to select the weekly programme to be reset at the
end of the Holidays period.
• Use the OK key to confi rm
The display shows the Antifreeze or Thermal protection mode Icon as well
as the time and date of the Holidays programme end.
The Chronothermostat is now working under the new preset mode.
23