Customizations
Select the function of the external Probe
Select the function of the external probe (default is Not active).
You can select the following:
1: Not active - the probe will not be read
2: Ambient Temp - measures the ambient temperature in lieu of the
Chronothermostat internal sensor
3: Floor - measures the temperature of the fl oor and turns off the load
if it exceeds the set value
4: External Temp. - measures the external temperature; when selected,
every 2 seconds the outside temperature and the ambient temperature
will be displayed alternately (in the same position).
• Use the ÅÇ keys to select the option "External probe"
• Press OK to confi rm
• Use the ÅÇ keys to select the function
• Press OK to confi rm
If you set the "Floor" function, a screen will be displayed which will let you
set the threshold temperature of the probe (range: from 15 to 55°C; default
is 35°C).
• Use the ÅÇ keys to change the threshold temperature
• Press OK to confi rm and to go back to the previous page or press C
to exit the menu and to return to the previous page, hence cancelling
the change.
View/Reset the activation Hours
This function enables you to display/reset the functioning hours of
the system.
• Use the ÅÇ to select the option "Operation time"
• Press OK to confi rm
The display will show the functioning hours of the system.
• Press OK to confi rm and to go back to the previous page or, to reset
the counter, use the ÉÑ lkeys to select the "Reset" function
• Press OK to confi rm, C to go back to the previous page.
Resetting the Chronothermostat
This lets you totally reset the Chronothermostat; all factory settings will
be retrieved.
• Use the ÅÇ keys to select the option "Reset"
• Press OK to confi rm
The display will show a confi rmation request.
• Press OK to Reset the Chronothermostat and to go back to the previous
page or press C to cancel and to return to the previous page.
After executing this operation, the Chronothermostat confi guration
as well as all the programming operations will be lost!
28