Before You Get Started; Removing The Locking Pin; Removing The Transport Lock; Fitting The Wall Spacer - Seca 761 Manual De Instrucciones Y Garantía

5. BEFORE YOU GET STARTED ...

5.1 Removing the locking pin

Click!

5.2 Removing the transport lock

5.3 Fitting the wall spacer

34 •
1. Turn the locking pin on the base of the housing a
quarter-turn anticlockwise.
2. Take out the locking pin.
NOTE
Keep the locking pin for transporting the scale
at a later date.
Remove the transport lock from the lower section
of the housing.
NOTE:
• Put the transport lock in a safe place for
subsequent transport of the scale.
• You can use the transport lock as a wall
spacer (see section "Fitting the wall spacer").
If you wish to position the scale close to a wall, we
recommend using the transport lock (see section
"Removing the transport lock") as a wall spacer. This
stops the weighing platform from touching the wall and
the measured result from being incorrect.