Before You Get Started; Wall Mounting Of Cabled Remote Display; Installing The Wall Brackets - Seca 374 Manual De Instrucciones

5. BEFORE YOU GET STARTED ...

5.1 Wall mounting of cabled remote display

Installing the wall
brackets
40 •
Fragile
Do not throw or drop.
Permitted min. and max. temperature for transport and
storage
Permitted min. and max. moisture for transport and
storage
Packaging material can be disposed of through recycling
programs.
Various models are equipped with a cabled remote dis-
play. Choose an adequately strong, load-bearing wall
to mount the device. Standard rawl plugs are supplied
for installation on solid brick walls. We recommend use
of appropriate special rawl plugs for other types of
walls.
In order to install the wall brackets, proceed as follows:
1. Mark the drillholes at the desired height.
NOTE:
Consider the cable length of the respective
cabled remote displays when determining the
height.
2. Mark the drillholes for the wall brackets perpendicu-
lar to each other.
3. Drill the holes using a drill bit Ø 5 mm.
4. Insert the rawl plugs in the drill holes.
5. Mount the wall brackets using the screws.