Milnor 30022X8J Guía De Mantenimiento página 36

Chapter 3. Routine Maintenance
.
CAUTION 27 : Risk of malfunction—The level sensor must give correct data.
• Keep the connecting tube or hose free of blockages and leaks.
• Make sure that the connections are tight.
Figure 12: Steam Inlet Strainer. These are examples. Your machine can look different.
42044SP2 Washer-extractor
.
WARNING 28 : Risk of severe injury—You can accidentally release pressurized steam.
• Close the external shutoff valve and release remaining pressure before you do
maintenance.
Figure 13: Compressed Air Inlet Strainers. These are examples. Your machine can look different.
T-Strainer. Outside machine
frame on some models.
caution statement 29
1. See
strainer.
2. Compressed air in.
.
CAUTION 29 : Risks of injury and damage—
• Close the external shutoff valve and release remaining pressure before you do
maintenance.
PELLERIN MILNOR CORPORATION
76039CBW Tunnel Washer
T-Strainer. Inside machine
frame on some models.
Legend
. Remove plug to remove
32
Legend
1. Steam strainer. Remove
steam pressure before
you remove the plug. See
warning statement
28
2. Steam valve
Y-strainer. Used on some
models