Milnor 30022X8J Guía De Mantenimiento página 38

Chapter 3. Routine Maintenance
Figure 16: Suspension Components on Each Side of Rubber Spring-Hung Washer-extractors
Suspension Shaft
1. Grease ports on ball bushings (two on each side of the machine)
2. If cracks occur in the rubber, the rubber spring must be replaced.
3. If fluid comes out here or on the shaft, the seals are worn. The shock absorber must be replaced.
.
PELLERIN MILNOR CORPORATION
Rubber Spring
Legend
— End of BIUUUM09 —
34
Shock Absorber