Installation Style; Keystone; Pincushion; Anamorphic - JVC DLA-X900R Manual De Instrucciones

Installation Style

For setting to "Front", "Ceiling Mount (F)", "Rear", or "Ceiling Mount (R)" according to the installation status of the
projector.
"Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to the screen.
0
"Rear" or "Ceiling Mount (R)" is set when projector is installed in the rear with respect to the screen.
0

Keystone

For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
Vertical setting range: -16 to +16
0
*1 Increasing the value changes the aspect slightly.
*2 When "Pincushion" is set, "Keystone" is grayed out and cannot be adjusted.

Pincushion

For correcting distortion of the projection screen that occurs when projecting the image on a curved screen.
Setting range: 0 to 16
0
* When "Keystone" is set, "Pincushion" is grayed out and cannot be adjusted.

Anamorphic

Configure this setting when an anamorphic lens is used.
Setting
A
B
Off

High Altitude Mode

Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m above sea level).

Environment Setting

By configuring "Environment Setting" according to the viewing environment, image quality adjustment and correction
according to environmental differences are performed automatically to minimize any influence on the image quality.
Æ "Adjusting Image Quality Automatically According to the Viewing Environment" （p. 30）

Screen Adjust

By selecting the optimal correction mode according to the characteristics of the screen in use, corrections can be
performed to reproduce natural images with balanced colors.
Æ "Set Screen Adjust" （p. 30）
A frame as shown on the right appears at the center (gradation is accentuated in the illustration, but not in the actual
image).
The current black tone is displayed on the right side. Adjust accordingly until the boundary line with the left frame is no
longer noticeable.
54
Projects the 2.35:1 image with it stretched in the vertical direction only.
Projects the 16:9 image with it compressed in the horizontal direction only.
Projects the 2.35:1 image without any changes.
Description