Functional Description - Makita 6905B Manual De Instrucciones

Ocultar thumbs Ver también para 6905B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Switch action
1
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
to the "OFF" position when released.
Change the direction of rotation only when the tool
comes to a complete stop. Changing it before the
tool stops may damage the tool.
The switch is reversible, providing either clockwise or
counterclockwise rotation. To start the tool, simply pull
the lower part of the switch trigger for clockwise or the
upper part for counterclockwise. Release the switch
trigger to stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip
For 6906 only
Fit the side grip into the groove on the middle of the
hammer case and fasten securely.
002312
1. Switch trigger
002332
1. Side grip
1
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and
inconsistent fastening torque and/or damage to the bolt
or nut.
Installing or removing socket
For model 6905B
For tool with light fit detent pin
1
2
2
4
Align the hole in the side of the socket with the detent pin
on the anvil and push it onto the anvil of the tool until it
locks into place. Tap it lightly if required.
To remove the socket, simply pull it off.
For tool with firm fit detent pin
1
2
2
4
To install the socket, align the hole in the side of the
socket with the detent pin on the anvil.
Push the socket onto the anvil until it snaps into place.
Tap it lightly if required.
To remove the socket, depress the detent pin through the
hole in the socket and pull the socket off the anvil.
For model 6906
1
2
To install the socket, push it onto the anvil of the tool until
it locks into place.
To remove the socket, simply pull it off.
4
007321
1. Socket
2. Anvil
3. Hole
3
4. Detent pin
4
007322
1. Socket
2. Anvil
3. Hole
3
4. Detent pin
4
002338
1. Socket
2. Anvil

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

6906

Tabla de contenido