Description And Use; Warning - Caution - Vortice NORDIK ECO Manual De Instrucciones

Ocultar thumbs Ver también para NORDIK ECO:
Tabla de contenido

Publicidad

ENGLISH

Description and use

The product you have purchased is a reversible cei-
ling agitator fan unit with a maximum operating tem-
perature of 45°C.
NORDIK ECO series units have
been designed for household
use.
NORDIK ECO series units have been designed for
household installation and use. They are also suitable
for installations in Commercial or Industrial areas pro-
vided environmental conditions are not particularly
aggressive (i.e. corrosive, dusty environments, etc.).
Warning:
!
this symbol indicates that care must
be taken to avoid injury to the user
• Do not use this product for functions other than
those described in the instruction booklet.
• After having removed the product from its packing,
ensure that it is complete and undamaged: if indoubt
contact Vortice Service Centre.
• Do not leave packaging within the reach of children
or differently able persons.
• Certain fundamental rules must be observed when
using any electrical appliance:
- Never touch appliances with wet or damp hands
- Never touch appliances while barefoot
• Do not use the appliance where flammable vapours
are present (spirit, insecticides, petrol, etc.).
• To conform with applicable standards, the bottom
edges of the fan blades must be at a height of at
least 2.7 metres or more from the floor (fig.1) in non-
residential premises.
• Unauthorised changes to the factory set fittingshall
invalidate the guarantee and entitle the manu-
facturer to disclaim any whatsoever liability.
Caution:
!
this symbol indicates that care must
be taken to avoid damaging the appliance
Do not make modifications of any kind to this
appliance.
• Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance
but contact Vortice Service Centre.
• The electrical mains to wich the unit is connected
must conform to current standard.
• The appliance must be properly connected to an
electrical system in compliance with the applicable
regulations and equipped with an efficient earthing
system. If in doubt, have a qualified electrician
perform a thorough check.
• The electrical power source to which the product
isto be connected must be able to provide the
maximum amount of electrical power required by
the product.If it cannot do this, contact an electrician
for appropriate remedial action.
6
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by Vortice.
• If the appliance does not function correctly or
develops a fault, turn it off and contact Vortice
immediately. Ensure that only genuine original
Vortice spares are used for any repairs.
• Do not leave the appliance on unnecessarily: when
the appliance is not in use, turn the switch to off.
• Place the unit at a suitable distance from
walls,objects, etc.
• Specifications
for
correspond to the electrical data on data plate A
(fig.2).
the
power
supply
must

Publicidad

Tabla de contenido
loading

Tabla de contenido