Multiplex RR FunGlider Manual De Instrucciones página 12

Avión controlado por radio
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

RR FunGlider
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope
that you are completely satisfied with the contents of your kit. However, we would ask you to check all the parts (referring
to the Parts List) before you start construction, as we cannot exchange components which you have already modified. If
you find a part is not acceptable for any reason, we will gladly correct the defect or replace the item in question once we
have inspected it. Please send the component to our Service Department, with adequate postage pre-paid, being sure to
include the completed complaints form. We are constantly working on improvements to our models, and for this reason
we must reserve the right to change the kit contents in terms of shape or dimensions of parts, technology, materials and
fittings, without prior notification. Please understand that we cannot entertain claims against us if the kit contents do not
agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the
term. Building and operating them safely requires a certain level of technical competence and manual skill,
together with discipline and a responsible attitude at the flying field.
Errors and carelessness in building and flying the model can result in serious personal injury and damage to property.
Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we are
obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Warning:
Like every aeroplane, this model has static limits. Steep dives and senseless manoeuvres inappropriate to the type
may result in the loss of the aircraft. Please note: we will not replace the model in such cases. It is your responsibility to
approach the airframe's limits gradually. It is designed for the power system recommended in these instructions, but is
only capable of withstanding the flight loads if built exactly as described and if it is in an undamaged state.
The model is supplied pre-assembled and virtually ready to fly. The model can be ready for the air very quickly. Please take
the time to read through the Instructions before completing and flying the model, paying particular attention to the Safety
Notes and Tips. To complete the model's equipment you will need a receiver and flight battery. For our recommended
items please refer to the Instructions. For additional items (e.g. transmitter, battery charger etc.) refer to the current
catalogue or the MPX website at: www.multiplex-rc.de
Parts List
Part-No No.off Description
1
1
Panda Sport KIT building instructions
3 *
1
Fuselage, assembled *
5 *
1
L.H. wing panel *
6 *
1
R.H. wing panel *
7+8 1
Tailplane
30
50 Trim ballast
32
1
Trim ballast
20
2
Velcro tape, "hook"
21
2
Velcro tape, "loop"
28
1
Allen key
* With four factory-fitted Nano-S (UNI) servos, including all control surface linkages, Brushless motor PERMAX BL-O
2816-0900, controller MULTIcont BL-20 SD and assembled 9x6" folding propeller.
Airborne radio control system components / other accessories
Recommended equipment:
MULTIPLEX receiver, min. RX-5 light M-LINK
or RX-5 M-LINK receiver, telemetry-capable
With this receiver you can also use the telemetry modules, and equip your model
with sensors such as the vario / altimeter sensor and current sensor (electronic fuel gauge).
Recommended Flight battery
Flight battery Li-BATT FX 3/1-950 (M6)
Adhesives:
Zacki ELAPOR ® 20 g
Zacki ELAPOR ® Super liquid 10 g
Battery charger HiTEC Multicharger X1 AC Plus, with
AC/DC 100-240V/10-18V 6,0A
12
GB
Material
Moulded Elapor foam
Moulded Elapor foam
Moulded Elapor foam
Moulded Elapor foam
Metal balls
Metal balls
Plastic
Plastic
Metal
# 26 4273
Dimensions
Ready made
Ready made
Ready made
Ready made
Ø4mm / 15g
Ø13mm / 9 g
25 x 60 mm
25 x 60 mm
1.5 mm A/F
Order No. 5 5808
Order No. 5 5817
Order No. 15 7321
Order No. 59 2727
Order No. 59 2728
Order No. 114 118

Publicidad

Tabla de contenido
loading

Tabla de contenido