Accessory Disc Selection And Use; Slicing Operation - Waring Commercial WFP7E Manuel De Instrucciones

Turn the machine off.
• Always switch the food processor off by putting the lever to the OFF (
that the power is not supplied to the motor.
• Always switch the food processor off and wait until rotation stops before removing the cover.
• While the safety interlock switch will turn the machine off if the cover is rotated clockwise, or the
cover is removed while running, this should not be the means of ON/OFF ( ,
• Before rotating the lid, always make sure the machine is off by pressing the lever to the OFF (
position as a safety precaution, in the event that the machine was not turned off properly.

ACCESSORy DISC SELECTION AND USE

The WFP7E/K food processor disc accessories are made to perform a large variety of food
processing tasks. Two (2) accessory discs are included with the WFP7E/K food processor. As of this
printing they are:
• Prepare all food items to be processed by washing and peeling as required. Remove pits, stones, and
large seeds. Be sure the food will fit into the proper feed chute. Foods such as carrots, cucumbers,
etc., should be cut flat at both ends to provide a consistent slice throughout the whole product.
• With foods like cabbage, lettuce or any product that has an undesirable core, the core should be
removed. Medium size cabbage or lettuce heads may be cut into thirds to fit in the feed chute. Larger
heads may need to be quartered.
• When food preparation is complete, fill the chosen feed chute, put the pusher in place, turn the
machine on and monitor the results.
• Never try to slice soft cheese. Slice only hard cheese such as Parmesan. Do not use block sizes larger
than 3.5" x .750" x 4.0" (89mm x 19mm x 101mm). Always use well-chilled cheese when slicing. It is
recommend to place cheese in refrigerator for at least 1 hour before slicing. Do not slice mozzarella
in this unit. Damage to the unit may occur.
• When sliced food reaches nearly full capacity of the bowl, remove all sliced food from the bowl.
2 mm, ⁄ " slicing disc
5
6 4
Fine grating disc

SLICING OPERATION

) position. This assures
) operation.
)
13