Cd Changer Operations; Displaying Cd Titles - Clarion DXZ788RUSB Manual De Instrucciones

01_DXZ788RUSB_EN.book 45 ページ ２００７年１１月２７日 火曜日 午後６時３４分

CD Changer Operations

Note:
• The following operations are the same as for CD
mode:
∗Pause
∗Track selection
∗Fast-forward/fast-backward
∗Scan play
∗Repeat play
∗Random play
See "CD/MP3/WMA/AAC Operations" (page 29-
33) for details.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
∗ If "NO MAGAZINE" appears in the display, insert
the magazine into the CD changer. "DISC
CHECK" appears in the display while the player
loads (checks) the magazine.
∗ If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it's depended on the model.

Displaying CD titles

This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press and hold the [TITLE] button for 1
second or longer to display the title.
2. Press the [TITLE] button to change the title
display.
Procedure to scroll a title
Set "AUTO SCROLL" to "ON" or "OFF".
(The factory default setting is "ON". Refer to the
subsection "Setting the method for title scroll"
in section "Operations Common to Each
Mode".)
When set to "ON"
The title is automatically kept scrolling.
When set to "OFF"
To scroll just 1 time.
When you want to see the title again in the title
mode, press and hold the [TITLE] button for 3
seconds or longer to scroll the title.
Note:
• User title can't scroll.
Selecting a CD
1. Push the [P.CH] button upward or downward
to select a desired disc in the magazine.
45
DXZ788RUSB