LG DLEXOOOITM Guia Del Usario E Instrucciones De Instalacion página 126

HOW TO USE
STEAM FUNCTIONS
LG's new steam technology allows you to inject
fabrics with a swirling jet of hot steam to refresh
clothes, reduce static, and make ironing easier.
Simply select the STEAM FRESH
TM
cycle, or you
can add a Steam option to selected cycles.
Using the STEAM FRESH" Cycle
STEAM FRESH
TM
uses the power of steam alone
to quickly reduce wrinkles and odor in fabrics. It
brings new life to wrinkled clothes that have been
stored for an extended time and makes heavily
wrinkled clothes easier to iron. STEAM FRESH
TM
can also be used to help reduce odors in fabrics.
NOTES:
• REDUCE STATIC or EASY IRON options can
also be used during the STEAM FRESH
TM
cycle.
• Depending on the load (quantity of items), you
may change the amount of time for the cycle by
pressing the MORE TIME or LESS TIME button.
The display will show 3, 5, or BULKY LOAD. 3
means 3 or fewer items, 5 is for 4 or 5 items,
and BULKY LOAD indicates a large load such
as a comforter.
TO USe tile STEAM FRESH"
Cycle:
_ll Turn on the dryer and turn the cycle selector
knob to select the STEAM FRESH
TM
cycle.
_I To add an option function, select REDUCE
STATIC, EASY IRON, or WRINKLE CARE.
_1 Depending on the load (quantity of items),
steam time can be changed by pressing the
MORE TIME or LESS TIME buttons.
_1 Press START/PAUSE button to start the cycle.
Using the Steam Options:
This option injects steam late in
the drying cycle to reduce the
static electricity caused by dry
fabrics rubbing together. Change the amount of
time for the cycle by pressing the MORE TIME
or LESS TIME button, depending on the load
(quantity of items). The display will show the
recommended number of items, such as 7, 9, 11,
14, 16, or 18.
The EASY IRON option provides
uniform, properly dampened
fabrics for ironing, which can save
time and make ironing easier. Change the amount
of time for the cycle by pressing the MORE TIME
or LESS TIME button, depending on the load
(quantity of items). The display will show the
recommended number of items, such as 1, 2, 3,
4, or5.
The REDUCE STATIC and EASY IRON options
can only be used with the HEAVY DUTY,
CO-I-I-ON/TOWELS, NORMAL and PERM.
PRESS, DELICATES, ULTRA DELICATE, and
TIME DRY cycles.
NOTES:
• When SENSOR DRY is selected with the
REDUCE STATIC option, a DRY LEVEL of LESS
or DAMP cannot be selected.
• The REDUCE STATIC or EASY IRON option
may also be selected during TIME DRY cycles.
• After the Steam option is selected in TIME DRY,
the MORE TIME or LESS TIME buttons will
change the steam time ONLY.
• After pressing START/PAUSE, the MORE TIME
or LESS TIME buttons will be disabled.
TO Add STEAM tO a Standard Cycle:
_1 Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
Use the cycle setting buttons to adjust the
settings for that cycle.
Press the Steam option button for the Steam
option you would like to add. Then adjust for
the load size using the MORE TIME or LESS
TIME buttons.
0) Press START/PAUSE button to start the cycle.
WARNING:
• Do not open the dryer door during Steam
Cycles. Steam can cause severe burns.
• Do not fill the steam feeder with gasoline,
dry-cleaning solvents, or other flammable or
explosive substances. They give off vapors
vapors that could explode.
• Do not drink water from the steam feeder.
• Do not fill the steam feeder with hot water (over
86°F/30°C).
• Do not touch the steam nozzle in the drum
during or after the STEAM cycle.