Technical Information; Installation Considerations - Hansgrohe Axor Starck Organic 12425001 Instrucciones De Montaje

2¾" 2¾"
4⅜" 4⅜"
Tools Required / Outiles Utiles /
Herramientas Útiles
24 mm
2
2¾" 2¾"
4⅜" 7½"
3 mm
19 mm
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - handshower
Flow rate - tub spout
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This trim kit requires rough valve 15460181 (not
included).
• Protection against backflow is provided by a
check valve in the handshower hose and by an
automatically resetting diverter.
• This showerpipe is for use with shower heads rated
at 2.5 GPM (9.5 l/min) or higher.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
2.5 GPM
4.8 GPM @ 44 PSI