Declaration Of Conformity; Important - MIRKA AROP-B 312NV Instrucciones De Manejo

en

Declaration of conformity

Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® AROP-B & ARP-B 77 mm (3") Electrical Polisher (see
"Technical data" table for particular model) to which this declaration relates are in conformity with the following
standards or other normative documents: EN 62841-1:2015, EN 60745-1:2009, EN 60745-2-3, EN 62841-2-4:2014,
EN 55014 in accordance with the regulations 2006/42/EC, 2014/30/EU, 2015/863/EU Charger safety specification
according to EN 60335-1:2012/A11:2014, EN 60335-2-29:2004/A2:2010, EN 62233:2008 Charger EMC according to
EN 55014-1/A2:2011, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013
Jeppo 25.03.2019
Place and date of issue
Operating instructions include: Exploded view,
Parts list, Declaration of conformity, Required
personal safety equipment, Warning, Caution,
Safety rules, Safety warnings, Safety instructions,
Technical data, Noise and vibration information,
Proper use of tool, Battery and charger, How to
get started, Operating instructions, Maintenance,
Further service, Troubleshooting guide, Disposal
information
Original instructions We reserve the right to make changes to this manual without prior notice

Important

Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe and accessible place
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents; Government Printing Office; Washington DC 20402
• State and local regulations
54
Mirka® AROP-B 312NV & ARP-B 300NV • 77 mm (3") • 10.8 V
Wear
safety glasses
CONFORMS TO UL STD
62841-1, 60745-2-3, 62841-2-4
CERTIFIED TO CAN/CSA STD
C22 2 No 62841-1, C22 2 No 60745-2-3, C22 2 No 62841-2-4
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask