Inglesina Darwin Toddler i-Size Manual De Instrucciones página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
• Do not use the Darwin Toddler i-Size child car seat after 7 years from the date of
production indicated on the product; the natural ageing of the materials may cause
slight changes of the product's properties.
• Do not use the Inglesina Darwin Toddler i-Size child car seat and/or the Darwin Base
i-Size, if:
- they were subject to an accident, even to a slight one. They may have been
subject to invisible damages. The product has to be replaced with a new one to
assure the original safety level.
- they are damaged, not equipped with the instruction manual, or any component
is missing. Contact the Inglesina authorized Retailer or Customer Care Service
immediately.
• Inglesina advises that child car seats should not be bought second-hand. They may
have invisible damages that affect the safety performances.
• Verify the correct hooking of all components of the Inglesina Darwin Toddler i-Size
child car seat and of the Darwin Base i-Size before each travel and/or when the vehicle
is subject to periodical checks, maintenance, and cleaning. Other people may have
moved and/or unhooked the Inglesina Darwin Toddler i-Size child car seat and of the
Darwin Base i-Size and may not have repositioned them properly pursuant to the
instructions.
• Make sure the indicators of the Darwin Base i-Size are green to ensure proper fitting.
• The temperature inside the parked vehicle can increase very quickly up to
dangerous thresholds for the child, especially in summer. It is recommended to never
leave your child unattended in the vehicle even for a few minutes.
• WARNING! Always secure the child with the safety straps provided.
• Adjust the backrest position in accordance with the height of the child so that the
back straps are behind the shoulders.
• Check that any straps restraining the child is adjusted to the child's body and is not
twisted.
• Avoid putting thick clothes on your child under the belt.
• Make sure you can fit no more than one finger between the harness and your child
(1 cm).
• The child's clothing should not interfere with the proper hooking of the buckle.
• Never leave the child in the child car seat if straps are loose or unfastened.
• THE CHILD RESTRAINT SYSTEM MUST BE INSTALLED IN STRICT COMPLIANCE
WITH THE INSTRUCTIONS PROVIDED. FAILURE TO OBSERVE INSTRUCTIONS/
WARNINGS CAN SERIOUSLY COMPROMISE YOUR CHILD'S SAFETY.
• The child car seat must be assembled and fitted on the base when the child is not in
it.
• Before assembling, verify that the product and all its components have not been
subject to damages during transport. Should this be the case, do not use the product
and keep it out of reach of children.
• For the safety of your child, remove and eliminate all plastic bags and elements
belonging to the packaging before use and, in any case, keep them out of reach of
newborns and children.
22
SAFETY BELTS
USE AND INSTALLATION

Publicidad

Tabla de contenido
loading

Tabla de contenido