Inglesina Darwin infant i-Size Manual De Instrucciones página 25

child car seat before each travel and/or when the vehicle is subject to periodical
checks, maintenance, and cleaning. Other people may have moved and/or unhooked
the Inglesina Darwin Infant i-Size child car seat and may not have repositioned the
same properly pursuant to the instructions.
• WARNING! Always secure the child with the safety straps provided when the child
is in the product even when handling or carrying the product by hand.
• Adjust the backrest position in accordance with the height of the child so that the
back straps are behind the shoulders.
• Check that any straps restraining the child is adjusted to the child's body.
• Avoid putting thick clothes on your child under the belt.
• Never leave the child in the child car seat if straps are loose or unfastened.
• The child's clothing should not interfere with the proper hooking of the buckle.
• For the child car seat to offer optimum protection, shoulder belts should fit the body
as closely as possible.
• Check that straps with buckles are not twisted and are not trapped in the car door
or the mobile parts of the child seat.
• CORRECT USE AND INSTALLATION OF THE CHILD CAR SEAT CAN BE A MATTER
OF LIFE OR DEATH. THE CHILD CAR SEAT MUST BE INSTALLED IN STRICT
COMPLIANCE WITH THE INSTRUCTIONS PROVIDED. FAILURE TO OBSERVE
INSTRUCTIONS/WARNINGS CAN SERIOUSLY COMPROMISE YOUR CHILD'S
SAFETY.
• Before assembling, verify that the product and all its components have not been
subject to damages during transport. Should this be the case, do not use the product
and keep it out of reach of children.
• For the safety of your child, remove and eliminate all plastic bags and elements
belonging to the packaging before use and, in any case, keep them out of reach of
newborns and children.
• Do not use the product, unless all its components are properly fastened and
adjusted.
• Do not use the product if any components are broken or missing.
• Assembly, disassembly and adjustment operations must be carried out only by
adults. Make sure that the person using the product (baby-sitter, grandparents, etc.)
are aware of its correct operation.
• Do not insert your fingers inside the mechanisms.
• Check that all locking mechanism that attach/tighten the child car seat to the
vehicle seat/to the base/to the chassis are secured correctly before and during use.
• When using the Darwin Infant i-Size child car seat together with the Darwin Base
i-Size, before installing it, read the dedicated instructions carefully. Make sure the
indicators are green before you drive.
• When the Darwin Infant i-Size car seat is used without the Darwin i-Size Base:
- check that any straps holding the child car seat to the vehicle is tight.
- do not to use any load bearing contact points other than those described in the
instructions and marked in the child car seat.
• Do not use adapters other than those supplied with the product or in any case non
SAFETY BELTS
USE AND INSTALLATION
25