Control Panel Description; Description Of The Display; Before Using The Oven For The First Time - Hoover FE GD21 RB Instrucciones De Uso

CONTROL PANEL DESCRIPTION

Function selector
knob

DESCRIPTION OF THE DISPLAY

Selected cooking mode :
Auto: illuminated display,
automatic mode
Auto off : manual mode
Oven functionning display
and recommended livel
position

BEFORE USING THE OVEN FOR THE FIRST TIME

• PRELIMINARY CLEANING
- clean the oven before using for the first time:
. wipe over external surfaces with a damp soft cloth.
. Wash all accessories and wipe inside the oven with a solution
of hot water and washing up liquid.
. Set the empty oven to the maximum temperature and leave
on for about 1 hour, this will remove any lingering smells of
newness. Ensure that the room is well ventilated while this is
being done.
• THINGS TO REMEMBER
Confirmation of operation: modification must be confirmed
by pressing the central button.
Stopping the oven: this may be necessary if you have input
an incorrect instruction.
To stop the oven .... turn back the function selector knob to
the Stop Position.
Child safety device: To lock the oven controls, select the child
safety device. Refer to the section entitled "Programming - The
child safety device".
The cooling fan: this protects the control panel and electronics
from heat damage.
It begins and then stops automatically even when the oven is
switched off.
Oven lighting: By turning to the light symbol, you can switch
on the oven light when it is not in use.
When the oven is in use, the light stays on during all of the
oven functions and when the door is opened.
Display panel: time, programming of cooking mode, indicator lights,
cooking temperature function and shelf positioning
Button for regulation
Settings: quantity/weight, temperature, programming cooking and end of
cooking time - Regulated by turning the button towards "-" or "+"
To confirm settings: press the button
Booster display:
pre-heating
Rotisserie
Indicator light:
Child safety device
Textual zone
Oven selector knob
L
and confirmation
Programmation
Programme symbol display: cooking
display: cooking
time, timer and end
time, cooking timer and cooking end
L
Indicator light:
rising temperature
Cooking temperature
ex. : 200°C or
grilling functionning
• CLOCK SETTING
When the oven is connected to the electricity supply or after a
long power cut, the clock must be re-set.
. To set the clock :
1- Turn the control knob to the "Clock" symbol :
2- When the minutes flash, set the central button by turning to
the "-" or "+" symbol. Confirm by pressing the central button.
3- The hours will then flash, set with the central button by turning
to the "-" or "+", confirm by pressing the central button.
4- Turn back the control to the STOP position, the new hour is
set.
• LANGUAGE CHOICE
To change the language display, carry out the following
procedure :
1- Turn the programme selector knob to "Light" symbol.
2- Press the central button in and hold for 3 seconds. The
display panel will show ENGLISH. Turn the button until the
required language appears and confirm by pressing the same
button.
The display will disappear.
3- Your selection is now confirmed. Turn the programme selector
knob back to the
20 GB
Time
ex. : 9.00
Indicator light
Closing of the oven door
Cooking quantity
(persons or weight)
position.