Acoustic Signals - Reiner jetStamp graphic 970 Manual De Instrucciones

jetStamp graphic 970

4.4. Acoustic Signals

Signal
1 sound impulse - When the trigger
1 sound impulse
every 10 se-
conds
2 sound impul-
ses every 30
seconds
3 sound impulse - Print cartridge empty
4 sound impulse - jetStamp graphic 970
5 sound impul-
ses per minute
64
Cause
button is pushed while
the set wheel is in the
position F
(see „Online Help
Page 53)
- No or defective print
cartridge
- Wrong print cartridge
- Ink level writing error
- Print cartridge not
inserted correctly
- Rechargeable battery
empty
- No rechargeable
battery/defective
rechargeable battery
- Print carriage move-
ment blocked
- Print cartridge almost
empty
not in the base station
- Battery nearly flat/
capacity low
Removal Notes
- Insert print - The detailed cause and
cartridge
- Insert print
cartridge cor-
rectly
- Charge rechar-
geable battery
- Insert/replace
rechargeable
battery
- Check print
- Replace print
cartridge
- Put the jetStamp - The display appears after
graphic 970 in
the base station
- Visual signal as well
- Charge/replace
rechargeable
battery
removal can be
determined in the
status display of the
PCSet graphic software
30 seconds without use for
standard ink, and after 10
seconds for MP ink.
d