Using The Appliance - Saivod FH-09 Manual De Instrucciones

USING THE APPLIANCE

1) Place the heater on a level surface in a stable upright position. Make sure the power switch is in the "OFF"
position.
2) Insert the plug into a suitable outlet.
3) Switch on the heater to the heating level your prefer. Turn the thermostat dial fully in a clockwise direction to
the maximum setting.
4) This heater is fitted with a safety tip-over swtich, it will cut-off the heater automatically once it is tilted or
tipped over. Always ensure the heater is placed on flat solid ground before operating.
POWER SWITCH SETTING
FH-09.indd 20 7/16/2015 5:55:49 PM