IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
12
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
ELECTRIC PRESSURE WASHER
WARNING: This appliance has been de-
signed for use with the cleaning agent sup-
plied or recommended by the manufacturer.
The use of other cleaning agents or chemicals
may adversely affect the safety of the appli-
ance.
WARNING: High pressure jets can be dan-
gerous if subject to misuse. The jet must not be
directed at persons, live electrical equipment
or the appliance itself.
- Do not direct the jet against yourself or oth-
ers in order to clean clothes or foot-wear.
- Disconnect from the electrical power supply
before carrying out user maintenance.
- High pressure cleaners shall not be used by
children or untrained personnel.
- To ensure appliance safety, use only origi-
nal spare parts from the manufacturer or ap-
proved by the manufacturer.
- Do not use the appliance if a supply cord or
important parts of the appliance are damaged,
e.g. safety devices, high pressure hoses, trigger
gun.
- If an extension cord is used, the plug and
socket must be of watertight construction.
WARNING: Inadequate extension cords can
be dangerous
- Remove the plug from the socket-outlet dur-
ing cleaning or maintenance and when replac-
ing arts or converting the machine to another
function. The machine must be attended dur-
ing operation.
- The electric supply to this appliance should in-
clude either a residual current device that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms or a device that
will prove the earth circuit. (Only for recom-
mend)