Hella 2VP 340 950 Serie Instrucciones De Montaje página 9

ENGLISH
Operation of the light
using alternating voltage
or clocked direct voltage
is not permitted!
direction indicator
stop light
tail light
reversing light
In connection with these low powers
that differ considerably from a light-
bulb version, there may be problems
9
I
PIN 1
Function ground
Wire colour white
II
PIN 1
Function ground
Wire colour white
PIN 1
Function ground
Wire colour white
III
Function ground
Wire colour white
with the bulb failure monitor on different
towing vehicles during operation.
As monitoring of the direction indicators
is required by law, we recommend
operating the lamp only in connection
with a direction indicator control unit,
3,0W Hella part number 5DS 009 552-... .
5,0W Beyond that, further light functions are
0,7W detected by some towing vehicles.
5,5W This represents a comfort function of
the vehicle that is not required by law
and does not exempt the driver from
his or her duty to visually check the
lighting equipment.
2 3
stop light tail light
red brown/black*
2 3
stop light tail light
red brown/black*
2
rear fog light
black
stop light tail light
red brown/black*
4 5
reversing light —
pink —
4 5
reversing light —
pink —
reversing light —
pink —
Also in this case, there may be a wrong
diagnosis (instrument panel in the
driver's cab indicates a bulb failure
although the bulb is working) due to the
low powers.
If faulty diagnoses such as those
described above should occur during
operation with your towing-vehicle type,
please contact the towing-vehicle
manufacturer.
6 7
— direction indicator
— yellow/green*
6 7
rear fog light direction indicator
blue yellow/green*
— direction indicator
— yellow/green*
GB
6 1
5 7 2
4 3
6 1
5 7 2
4 3
2 1
* LH/RH