Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

Get started

Power
Place the unit in the desired position and unravel the mains cable. Insert the AC adapter into the
supply
socket and switch on if applicable.
Auto standby
When playing media from a connected device, the soundbar automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Use
Play from external audio
You can play from an external audio device such as MP3 player through this unit.
Auxiliary Input RCA (Requires an RCA cable)
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the audio
output on your DVD player, stereo system, gaming system or television.
2. Press the power button to turn the unit on.
3. Press the MODE button to switch to Aux In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Bluetooth Mode
A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Please refer to the user manual of your cell phone for further information. The general
pairing steps are as follows:
1. Keep
and Bluetooth cell phone within 1 meter when pairing.
SB50BT
2. Press
button, and press the MODE to select the Bluetooth mode.
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the search
is completed, select "
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
5. After successful pairing, select "
"connect".
6. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
7. Press
to skip to the previous song.
8 . Press
to skip to the next song.
" from the Bluetooth device list.
SB50BT
" from the Bluetooth device list and press
SB50BT
- EN 4 -

Publicidad

Tabla de contenido
loading

Tabla de contenido