4.2.2 INFRARED REMOTE CONTROL
The remote control communicates with the appliance by
The distance between the remote control and the receiver
must not be more than 5 m.
Fig. 9
When the appliance receives commands from the remote control,
ing transmission of the command.
Always handle the remote control with great
care and keep it in the slot on the appliance
(Fig. 10). If the batteries are inserted, a magnet
placed behind the slot will keep the remote con-
trol in place. It is recommended not to put within
REMOTE CONTROL
"-" key
"Mode" selection key
Overdrive (2h) key
5 m MAX
Fig. 10
As an alternative, the remote control can be placed in
the wall-mount support included in the packaging.
Do not drop the remote control nor leave it exposed to di-
rect sunlight. Do not spray water or other liquids onto the
remote control. Do not rest the remote control on the top of
the radiator or near other intense sources of heat.
Inserting or replacing the batteries:
– Remove the cover on the back of the remote control.
– Insert two "AAA" LR03 1.5 V alkaline batteries in the cor-
rect position.
– Put the cover back.
When replacing the batteries or disposing of the remote
control, the batteries must be removed and disposed of in
compliance with current legislation as they are harmful to
the environment.
-
Characteristics:
Size
Power supply
17
100 x 42 x 20,5 mm
"AAA" LR03 1.5 V alkaline
batteries
Display LCD
"+" key
Fan Heater key
ON/Standby key
GB