Tabla de contenido
Publicidad
NOTE:
If the radiator is turned on using the remote control after it
has been without power, the date, time and programme set
on the remote control will be restored.
GB
4.2.1 ON/STANDBY MODE
In "Standby" mode the current time and the day of the week
appear on the display.
All the operating modes are suspended ("Pilot Wire" includ-
ed), but the appliance is powered and waiting for command
reception.
Press the "ON/Standby" button by aiming the
remote control at the control panel to turn the
appliance and the remote control on in the op-
erating mode active before the appliance was
turned off.
If the batteries in the remote control have been replaced, the
appliance resumes operation in "Comfort" mode.
4.2.2 OPERATING MODES
The appliance provides 5 operating modes which allow the
user to heat the environment in the most suitable way with
respect to his needs.
Press the "Mode" button to choose the oper-
ating mode.
Pilot Wire
Night
Chrono
4.2.3 PILOT WIRE MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.2.4 COMFORT MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
Comfort
Anti-Freeze
18
4.2.5 NIGHT MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.2.6 ANTI-FREEZE MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.2.7 CHRONO MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.2.8 OVERRIDE (2H) FUNCTION
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.2.9 FAN HEATER FUNCTION
Use the "Fan Heater" function to heat the room more quickly.
Pressing the
LED "L1" on the control panel comes on.
After the
button has been pressed, the
Within this period, the "+" or "-" buttons can be used to mod-
ify the fan heater operating period between the following
available times: 15 min. – 30 min. – 45 min. – 1 hour. To turn
the fan heater off, press the
set on the remote control is reached, the "Fan Heater" func-
tion goes off automatically.
4.2.10 KEYPAD LOCK
It is possible to lock the remote control keypad to avoid ac-
Press simultaneously "+" and "Mode" key for
about 3 seconds to lock the keypad.
The lock icon
button turns the fan heater on.
icon is dis-
button again. When the time
appears on the display.
Publicidad
Tabla de contenido
