Tabla de contenido
Publicidad
4.1 USING THE RADIATOR FROM THE CONTROL PANEL:
LED "L1"
LED "L2"
LED "L3"
LED "L4"
LED "L5"
MANUAL Button
CONTROL PANEL LEDS
"L1"
Cycle/Fan
"L2"
Comfort/Chrono
"L3"
Pilot Wire
"L4"
Anti-Freeze
"L5"
Standby
4.1.1 ON/STANDBY
To turn the appliance on, place the main
switch on the control panel in the "I" position.
LED "L5" comes on.
To turn the appliance off completely, place the
switch in the "0" position.
The appliance can be controlled by the infrared remote con-
trol with LCD display or manually by the control panel.
4.1.2 MANUAL BUTTON
Avaiable only for electric towel warmer.
If you push the botton, the appliance confirm the recep-
tion of the signal and remains in the mode previously set.
Infrared Receiver
/
Green
/
Green
Green
Green
Red
CYCLE
15 min
4.1.3 COMFORT MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.1.4 PILOT WIRE MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.1.5 ANTI-FREEZE MODE
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
4.1.6 CYCLE FUNCTION
Avaiable only for electric towel warmer.
of the signal and remains in the mode previously set.
15
Cycle Button
Fan Heater key
Main switch
GB
Publicidad
Tabla de contenido
