Spare Parts; Electrical Diagram; Disposal; Ce Declaration - PLYMOVENT DUAL GO Manual De Instalación Y De Uso

Symptom Problem
The Escape of
extraction fume; no
arm does not proper
stay in the extraction
desired
position
You cannot
get the arm
in the desired
position
8

SPARE PARTS

8.1 Filter unit
The following spare filters are available for the filter unit;
- refer to exploded view Fig. VIII on page 59
8.2 Extraction arm
The following spare parts are available for the extraction arms;
- hose tube arm (EconomyArm): refer to exploded view Fig. VI
on page 55
- metal tube arm (KUA): refer to exploded view Fig. VII on
page 57
9

ELECTRiCAL DiAGRAM

Refer to the separately supplied electrical diagram.
10

DiSPOSAL

Dismantling and disposal of the unit must be done by qualified
persons.
Personal protective equipment (PPE)
Wear respiratory protection and protective
gloves when you dismantle and dispose of
the unit.
10.1 Dismantling
To safely dismantle the unit, obey the safety instructions that
follow.
Before dismantling of the unit:
- disconnect it from the mains
- clean the outside
During dismantling of the unit:
- make sure that the area is sufficiently ventilated, e.g. by a
mobile ventilation unit
After dismantling of the unit:
- clean the dismantling area
10.2 Disposal
Dispose of the pollutants and dust, together with the used
filters, in a professional manner in accordance with federal,
state or local regulations.

CE DECLARATiON

CE declaration of conformity for machinery
We, Plymovent Manufacturing B.V., Koraalstraat 9, 1812 RK
Alkmaar, Netherlands, herewith declare, on our own
responsibility, that the products:
- DualGo
- DualGo
plus
0000111692/150418/A DualGo
Possible Solution
cause
Friction setting Adjust the friction;
is not correct refer to Fig. V on
page 54 for the
adjustment points
which this declaration refers to, are in accordance with the
conditions of the following Directives:
- Machine Directive 2006/42 EC
- EMC 2014/30 EU
- LVD 2014/35 EU
- ErP Directive 2009/125 EC
Signature:
Name: M.S.J. Ligthart
Position: Product Manager
Date of issue: 1st May 2018
EN - 10