Spare Parts; Electrical Diagram; Disposal; Ce Declaration - PLYMOVENT MFS Instrucciones Para El Uso

Symptom problem
Dust or Pollution of
smoke coming the facility.
out of the
filter cover.
Dust or Pollution of
smoke coming the facility.
from dust
tray.
Vibrations in Machine not
the machine. steady.
8

SpaRE paRTS

The following spare parts are available for the machine (refer
to exploded view Fig. I on page 56).
article no. Description
MFS and MFS/C general
0000102271 Magnetic valve
0000102277 Control light 28V, yellow
0000102283 PC board control
0000102284 Tumbler switch
0000102286 Reset/start button
0000102289 Relay MC2A
0000102290 Transformer 50W/24V 115/230/400 V
0000102297 Aluminium fan wheel 50Hz
0000102305 Fan housing, motor side
0000102310 Star knob M8
0000102313 Bush Ø 203 mm
0000102344 Membrane + spring of magnetic valve
0046020040 Pressure regulating valve + pressure gauge
0046030010 Pressure relief valve 6-10 bar
0050101210 Hose set extraction arm for mounting on mobile unit
0102080110 Spark arrester (HD)
0328050120 Main switch VCO
0609590110 Starlock 22 mm
0612010220 Adjusting ring 19x1
0708020150 Aluminium fan wheel 60Hz
0805030010 Wheel Ø 250 mm black
0805040010 Swivel castor Ø 125 mm with brake
0805040050 Swivel castor Ø 125 mm without brake
0830301030 Sealing dust tray
0830301050 Sealing
9823020000 Filter cover incl. outlet grid
9824000020 Pressure difference switch (800 Pa)
9824000090 Piston mechanism
9850040090 Wheel covers yellow (2 pieces)
9850060110 DuraFilter FCC-30
9870080160 Fuse 2,0 A (10 pieces)
MFS 400V/3ph/50hz
0000102287 Thermal relay NTR 1.7-2.4A
0320000100 Motor 0,75kW, 230-400V/3ph/50-60Hz
MFS 230V/3ph/50hz
0000102288 Thermal relay NTR 3.0-4.7A
0320000100 Motor 0,75kW, 230-400V/3ph/50-60Hz
0507260010/301113/G MFS - MFS/C
possible Solution
cause
Main filter Replace main filter
damaged. (ref. 6.2.1).
Sealing on main Replace main filter
filter damaged. (ref. 6.2.1).
Main filter Place main filter
placed correctly.
incorrectly.
Dust tray placed Position dust tray
incorrectly. correctly and
tighten star knob.
Sealing material Replace sealing
of dust tray material.
defective.
Imbalance in Clean the extraction
the extraction fan.
fan.
article no. Description
MFS 230V/1ph/50hz
0321012030 Motor 0,75kW, 115-230V/1ph/50-60Hz
0328400130 Thermal relay NTR 4.0-6.3A
MFS 115V/1ph/50hz
0321012030 Motor 0,75kW, 115-230V/1ph/50-60 Hz
0328400160 Thermal relay NTR 10-14A
MFS/C 400V/3ph/50hz
0000102287 Thermal relay NTR 1.7-2.4A
0041000040 Compressor unit MFS 230V/1ph
0320000100 Motor 0,75kW, 230-400V/3ph/50-60Hz
MFS/C 230V/3ph/50hz
0000102288 Thermal relay NTR 3.0-4.7A
0041000040 Compressor unit MFS 230V/1ph
0320000100 Motor 0,75kW, 230-400V/3ph/50-60Hz
MFS/C 230V/1ph/50hz
0041000040 Compressor unit MFS 230V/1ph
0321012030 Motor 0,75kW, 115-230V/1ph/50-60Hz
0328400130 Thermal relay NTR 4.0-6.3A
9

ELECTRICaL DIagRaM

Refer to the separately supplied electrical diagram.
10

DISpOSaL

After life of the machine, dispose it of in accordance with
federal, state or local regulations.

CE DECLaRaTION

EC declaration of conformity for machinery
We, Plymovent, Wezelkoog 11, 1822 BL Alkmaar, the
Netherlands, herewith declare, on our own responsibility, that
the products:
- MFS
- MFS/C
which this declaration refers to, are in accordance with the
conditions of the following Directives:
- Machinery Directive 2006/42 EC
- EMC 2004/108 EC
- LVD 2006/95 EC
- ErP Directive 2009/125 EC
Alkmaar, The Netherlands, 30 November 2013
Ir. F. Coehoorn
Vice President Researchh & Development
EN - 10