Product Set-Up - D-Link GO-DSL-AC750 Guia De Instalacion

PRODUCT SET-UP

DEFAULT SETTING
Router Power Supply
PC
Router
Telephone
Wall socket
Router
Internet
Save
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure GO-DSL-AC750 manually (without the set-up CD) connect your computer to the GO-
DSL-AC750 using the ethernet cable provided. Then connect the power cable on the GO-DSL-
AC750. The power light will display as solid green.
Then simply open a browser window and enter the IP address in the browser address field:
4
Step 1
Power Adapter Connection
Plug the Power adapter Unit into the wall outlet and then connect
the other end of it to the Power port of the router (12VDC IN). Switch
on the plug point on.
Step 2
LAN connection
Connect the Ethernet LAN cable to any (Yellow) port on the router
and connect the other end to the LAN port of the PC.
Step 3
DSL Port Connection
Connect the (DSL) port of the Router, using the (gray) telephone
cable to the port marked ( DSL) on the splitter. Connect the short
(Line) cable attached to the splitter to connect the telephone wall
socket.
Step 4
From the computer you connected to the router, open a web browser
and go to http://192.168.1.1. Enter admin as the User Name and
Password, and you may use the Setup Wizard to configure your
GO-DSL-AC750.
IP ADDRESS: http://192.168.1.1
USERNAME: admin
PASSWORD: admin
GO-DSL-AC750