Quick Start - Samson Graphite M25 Guia De Inicio Rapido

Graphite M25 · USB Keyboard Controller

Quick Start

Computer
1. Connect the Graphite M25 to your computer or iPad* using the supplied USB cable. The
unit will receive power and transmit MIDI data via the USB connection.
If the Graphite M25 is connected to a non-powered USB hub, it may not receive enough
power to turn on. It is recommended that you connect the Graphite M25 directly to your
computer or to a powered USB hub.
2. Launch your DAW or virtual instrument software.
3. Set the Graphite M25 as the MIDI Input and MIDI Output device.
*To connect directly to an iPad, you will need to use the Apple iPad Camera Connection Kit or
Lightning to USB Camera Adapter (not included).
7