Preheating The Oven; Setting Cooking Time - Whirlpool AKZM 8350 Manual Del Usuario

PREHEATING THE OVEN

200°C --:--
TEMPERATURE COOK TIME
Conventional
No --:--
Start
PREHEAT END TIME
200°C --:--
TEMPERATURE COOK TIME
Conventional
Yes --:--
Start
PREHEAT END TIME
If you wish to preheat the oven before inserting food, change the oven's default selection as follows:
1. Turn the "Browse" knob to position the cursor at preheating.
2. Press button to select the setting: No" flashes on the display.
3. Change the setting by turning the "Browse" knob: "Yes" appears on the display.
4. To confirm your choice, press button
FAST PREHEATING
If you wish to preheat the oven quickly before inserting food, change the oven's default selection as
follows:
1. Turn the "Functions" knob to select the fast preheating function.
2. Confirm by pressing
3. If the proposed temperature is that desired, turn the "Browse" knob to position the cursor at "Start" and
then press . To change the temperature, proceed as described in previous paragraphs. An acoustic signal
will sound when the oven has reached the set temperature. At the end of preheating, the oven
automatically selects the conventional function
At this point food can be placed in the oven for cooking.
4. If you wish to set a different cooking function, turn the "Functions" knob and select the desired
function.

SETTING COOKING TIME

180°C --:--
TEMPERATURE COOK TIME
Conventional
No --:--
Start
PREHEAT END TIME
180°C 00:01
TEMPERATURE HH:MM
Conventional
No 19:01
Start
PREHEAT END TIME
This function can be used to cook food for a set length of time, from a minimum of 1 minute to the
maximum time allowed by the selected function, after which the oven switches off automatically.
1. The submenus are available and selectable by turning the "Browse" knob to position the cursor at
"COOKING TIME".
2. Press button to select the setting; "00:00" flashes on the display.
3. Change the value by turning the "Browse" knob to display the desired cooking time.
4. Confirm the selected value by pressing button
BROWNING
At the end of cooking, with certain functions, the display indicates the possibility of browning the surface of
your dish. This function can only be used when cooking time has been set.
Cooking finished at 20:00
+/- to prolong, ✓ to brown
At the end of cooking time, the display shows "+/- to prolong,
starts a 5 minute browning cycle. This function can only be used once after cooking.
200°C
TEMPERATURE
Conventional
No
Start
PREHEAT
200°C
TEMPERATURE
Conventional
Yes
Start
PREHEAT
.
Frozen Food
Defrost
Warm Keeping
Specials: For defrosting food
: the settings are shown on the display.
180°C
TEMPERATURE
Conventional
No
Start
PREHEAT
180°C
TEMPERATURE
Conventional
No
Start
PREHEAT
Browning
--:--
COOK TIME
--:--
END TIME
--:--
COOK TIME
--:--
END TIME
180°C
TEMPERATURE
Turn +/- to adjust ...
.
- 00:30
HH:MM
19:01
END TIME
- 00:30
COOK TIME
19:20
END TIME
:
- 00:05
COOK TIME
20:05
Browning finished at 20:05
END TIME
to brown". Press button
GB10
Start
, and the oven