Selection Tables For Monobolt®, Avdelok®, Avtainer®, Maxlok® And Hemlok - avdel 07287 Manual De Instrucciones

Nose Assemblies
Selection Tables for Monobolt®, Avdelok®, Avtainer®, Maxlok® and Hemlok®
Service Instructions
Nose assemblies should be serviced at weekly intervals.
•
Remove the complete nose assembly using the reverse procedure to the 'Fitting instructions'.
•
Any worn or damaged part should be replaced by a new part.
•
Particularly check wear on jaws.
•
Ensure Jaw Spreader 7 assembly tube (where fitted) or Front Spring Guide 6 is not distorted.
•
Check Spring 9 is not distorted.
•
Assemble according to fitting instructions.
Item numbers in bold refer to the Nose Assembly drawing on page 8.
17