Generac GH-410 Manual Del Propietário página 30

Section 6: Quick Reference Guide
Active Alarm LED
OVERSPEED RED
UNDERVOLTAGE RED
UNDERSPEED RED
STEPPER
RED
OVERCURRENT
MISWIRE RED
OVERVOLTAGE RED
LOW BATTERY YELLOW
BATTERY
YELLOW
PROBLEM
CHARGER
YELLOW
WARNING
SERVICE A YELLOW
SERVICE B YELLOW
INSPECT BATTERY YELLOW
26
Table 6-1. System Diagnosis (Continued)
Problem
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Things to Check
Contact Independent Authorized Service
Dealer.
Contact Independent Authorized Service
Dealer.
Contact Independent Authorized Service
Dealer.
Contact Independent Authorized Service
Dealer.
Contact Independent Authorized Service
Dealer.
Contact Independent Authorized Service
Dealer.
Clear alarm. Using the control panel, check
the battery by navigating to the BATTERY
MENU option from the MAIN MENU. If it
states battery is GOOD contact
Independent Authorized Service Dealer. If
it states CHECK BATTERY, replace the
battery.
Contact Independent Authorized Service
Dealer.
Contact Independent Authorized Service
Dealer.
Perform SERVICE A maintenance. Press
ENTER to clear.
Perform SERVICE B maintenance. Press
ENTER to clear.
Inspect Battery. Press ENTER to clear.
Owner's Manual for 60 Hz Air-cooled Generators
Solution