Options For Terminating Cable In The Field - Honeywell MILLER Vi-Go Serie Manual De Isntrucciones

5.6 Options for Terminating Cable in the Field

for increased versatility during installation to accommodate
variable cable lengths. These options are compatible
with 3/8" diameter approved cable only.
Thimble and Wire Rope
Cable Termination Kit (VGTWC)
1. Feed cable around cable thimble, turning back 5-1/4" of cable from
thimble end.
dead end of rope. Use torque wrench to tighten evenly, alternating
from one nut to the other until reaching a torque of 45 ft. lbs.
2. Install second cable clip as close to the thimble as possible. Again,
use torque wrench to tighten evenly to 45 ft. lbs.
1 Clip Base Width (1-1/8")
from Dead End
Dead End
Live End
Fast-Attach Fitting for 3/8" Diameter Approved Cable (VGF-1)
*Wedge Set includes three toothed
wedges and retaining ring.
U s er Ins tru cti o ns - E ngl i s h
13
Completely Assembled