Kenmore 790.4045 Manual De Uso página 15

Self-Cleaning (cont'd)
Starting the Select Self-Clean Cycle
For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a
3 hour cycle for average to heavy soils. NOTE: The kitchen area should
be well ventilated using an open window, ventilation fan or exhaust hood
during the 1st Self-Clean cycle. This will help eliminate the normal odors
associated with the 1st Self-Clean cycle.
To Set the Controls for a Self-Clean Cycle
1. Be sure the clock shows the correct time of day.
2. Press . "— — —" appears in the display.
3. Press the until "3:00" appears in the display for a 3 hour cycle, or
press until "2:00" appears in the display for a 2 hour cycle.
4. As soon as or
5. As soon as the controls are set, the motor driven lock will begin to close
automatically and the "Door locked" indicator light will flash. DO NOT
open the oven door while the light is flashing (it takes about 15 seconds
for the oven door to lock).
6. The "Door locked" indicator light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day or "End" will appear in the display window and the
"Clean" and "Door locked" light will continue to glow.
2. Once the oven has cooled down for about 1 HOUr and the "LOCK"
light has gone out, the oven door can be opened.
3. If "End" is in the display and the Select Clean indicator light remains
ON, press . The time of day will appear in the display.
NOTE: When the oven is cool, wipe away any residue or powdered ash
with a damp cloth or paper towel.
Stopping or Interrupting a Select Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1. Press .
2. Once the oven has cooled down for about 1 HOUR and the "Door
locked" light has gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.
is released, "CLn" appears in the display.
15
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow
hot air or steam to escape.
DO NOT force the
oven door open. This can damage
the automatic door locking
system. Use caution and avoid
possible burns when opening the
door after the Self-Cleaning cycle
has completed. The oven may still
be VERY HOT.