Operation
Touchscreen Overview
Performance View
Artist
Deck/
Layer
Crates
Playlists/
History
Prepare List
Files
Search
Initial cue point
Loop on/off
Swipe left or right on the track overview to scan through the track while the track is paused.
Note: You can use this feature during playback if Needle Lock is off. If Needle Lock is on, make sure the platter is
in Vinyl Mode (press Vinyl so it is lit) and touch the top of the platter while swiping the track overview. See
Configuration > Preferences
Spread or pinch your fingers on the waveform to zoom in or out of it, respectively. Alternatively, turn the
Select/Zoom knob.
Tap an icon to select it (e.g., the icons for Crates, Playlists, Prepare List, Files, or Search on the left side).
Tap a button to activate or deactivate it (e.g., the Quantize, Continue, or Key Lock buttons).
Tap the time to switch between the elapsed time and remaining time.
Tap the key to show the Key Change Menu, where you can adjust the key of the track.
You can also show or hide the beat grid controls in Performance View. The beat grid is automatically detected and
set when the track is analyzed.
To show the beat grid controls, press and hold the Select/Zoom knob for a second. Six buttons will appear
at the bottom of the display, and the beat grid markers will appear on the waveform.
To reset the beat grid, tap Reset.
To shift the downbeats of the beat grid left or right (in one-beat increments), tap the < or > buttons,
respectively, or turn the Select/Zoom knob.
To freely shift/"slide" the beat grid left or right, move the platter.
To halve or double the number of beat grid markers, tap /2 or X2, respectively.
To hide the beat grid controls, press the Select/Zoom knob or tap Done on the touchscreen.
10
Continuous
play on/off
Track
Quantize
on/off
Playhead
(track overview)
Auto-loop
length
to learn about Needle Lock.
Bars
elapsed
Beat counter
Loop
region
Time remaining/
Playhead
elapsed
Sync
Track
state
tempo
Hot cue markers
Track key
Deck tempo
Pitch fader
range
Total pitch
adjustment
Waveform
Bar numbers
Pad functions
Track
overview