ARIETE MultiCooker Manual De Instrucciones página 16

EN
- After having selected the required program (13), on the display (5) the cooking time (11) will start
blinking; such time is to be set by pressing the increasing (9) / decreasing (6) buttons to change
the value in intervals of 1 minute.
- Pressing the START button (2), the appliance starts cooking and the display (5) shows the current
time. When reaching the required temperature, the countdown starts with an acoustic signal and
the display (5) shows the pre-set cooking time, the time progress bar (14), the temperature (11),
and the selected program number (13).
- After the cooking time has elapsed, the appliance emits 3 acoustic signals, entering automatically
the keep warm mode, according to the selected program. The display shows the "
and the heating time (11).
- Food is kept warm up to 2 hours max., until the STOP/RESET button (8) is pressed to cancel the
program.
ATTENTION:
In case of selection of the program No. 4 "Steam", it is necessary to insert the appropriate
cooking accessory (H) into the container (L) (Fig. 7).
In case of selection of the program No. 6 "Fry", it is necessary to add the sufficient oil amount,
by following the recipe, avoiding to exceed 2/3 of the container (L). Proceed with cooking by
ensuring the lid (O) is open.
In case of selection of the program No. 8 "Yogurt", it is not allowed to set the cooking time.
It takes some minutes to reach the selected temperature.
Manual mode
Through the manual function, it is possible to set also the required temperature as well as the time.
- In stand-by mode, press the manual function button (1); the display (5) shows the "
and the time, which must be set through the increase (9) and decrease (6) buttons, starts blinking.
The latter changes in 1-minute intervals.
- Press then the temperature button (4), by setting the required one through the increase (9) and
decrease (6) buttons. The temperature changes in 5°C intervals.
- Pressing the START button (2), the appliance starts cooking and the display (5) shows the time
(11). When reaching the temperature, the display shows the remaining cooking time (11) and the
countdown begins with an acoustic signal.
- After the cooking time has elapsed, the appliance emits 3 acoustic signals, entering automatically
the keep warm mode, according to the selected program. The display shows the "
and the heating time.
- Food is kept warm up to 2 hours max., until the STOP/RESET button (8) is pressed to cancel the
program.
- 14 -
" icon (16)
" icon (10)
" icon (16)