Selecting Discs From The Disc Title List; Pausing Cd Playback; Entering Disc Titles - Pioneer DEH-P9450MP Manual De Operación

S
electing discs from the disc
title list
The disc title list lets you see the list of disc
titles and select one of them for playback.
Displayed disc titles are those which have been
entered into the multi-CD player or recorded on
a CD TEXT disc.
1. Press FUNC and then press D.LIST to
select the disc title list mode.
2. Press NEXT to switch between "1" – "6"
and "7" – "12".
3. Press any of the buttons 1 – 6 (or 7 – 12)
to select the desired disc title.
That selection will begin to play.
Note:
• You can also use 2, 3 and 5 to select and play
the desired disc title.
• "No D.Title" is displayed for a disc whose title has
not been input.
• "No disc" is displayed next to the disc number
when no disc is set in the magazine.
• You cannot display "7" – "12" when a 6-disc multi-
CD player is connected.
P
ausing CD playback
Pause lets you temporarily stop playback of the
CD.
1. Press FUNC and then press PAUSE to
select the pause mode.
2. Press PAUSE to turn pause on.
The light illuminates. Play of the current
track pauses.
• Press PAUSE again to turn pause off.
• When the pause mode is exited while
pause is on, "PAUSE" is displayed in the
basic display.
Note:
• You can also turn pause on or off by pressing
PAUSE in the following display.
E
ntering disc titles
Disc title input lets you input up to 100 CD titles
up to 10 letters long (with ITS memory) into the
multi-CD player. If you input a CD title, the
entered title is displayed.
1. Press 5 5 or ∞ ∞ to play a disc you want to
enter the title.
2. Press FUNC and NEXT and then press
TTLin to select the disc title input mode.
3. Press ABC to switch the character mode.
Press ABC repeatedly to switch between the
following modes:
Alphabet (upper case), numbers and sym-
bols = Alphabet (lower case) = European
letters, such as those with accents (e.g. á, à,
ä, ç)
• Press 012 to switch to the numbers and
symbols mode.
4. Press 5 5 or ∞ ∞ to select letters, numbers
and symbols.
• To insert a space, select the flashing cur-
sor "_".
Continued overleaf.
26