Initial Settings; Initial Settings Menu; Using Reverse Mode; Using The Feature Demo - Pioneer DEH-P9450MP Manual De Operación

Initial Settings

I
nitial settings menu
The initial settings menu has the following func-
tions:
Initial settings menu operation
You can operate the initial settings menu only
when the source is off.
1. Press and hold SOURCE to turn the
source off.
2. Press and hold
settings menu.
• When the source is off, you can check the
location of " 1" by turning on the feature
demo.
Note:
• Press BAND to cancel the initial settings menu.
U
sing reverse mode
If you do not carry out an operation within about
30 seconds, screen indications will start to
reverse, and then continue reversing every 10
seconds.
You can turn the reverse mode on or off.
1. With the source turned off, press and
hold 1 to select the reverse mode.
2. Press REV to turn the reverse mode on.
"ON" appears in the display.
• Press REV again to turn the reverse mode
off.
1 to enter the initial
U
sing the feature demo
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON.
You can turn the feature demo on or off.
1. With the source turned off, press and
hold 1.
2. Press F.DEMO to select the feature demo
mode.
3. Press F.DEMO to turn the feature demo
on.
"ON" appears in the display.
• Press F.DEMO again to turn the feature
demo off.
Note:
• The red lead (ACC) of this product should be con-
nected to a terminal coupled with ignition switch
ON/OFF operations. If this is not done, the vehicle
battery may be drained.
S
witching the auxiliary setting
It is possible to use auxiliary equipment with
this product.
Turn the auxiliary setting on when using auxil-
iary equipment connected to this product.
1. With the source turned off, press and
hold 1.
2. Press AUX to select the AUX mode.
3. Press AUX to turn AUX on.
"ON" appears in the display.
• Press AUX again to turn AUX off.
44