Scanning Folders And Tracks; Pausing Mp3/Wma Playback - Pioneer DEH-P9450MP Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

S
canning folders and tracks
When you select folder repeat, scan play lets
you hear the first 10 seconds of each track in
the selected folder. When you select disc
repeat, scan play lets you hear the first 10 sec-
onds of the first track on each folder.
1. Select the repeat range.
Refer to "Repeating play" on page 21.
2. Press FUNC and then press SCAN to
select the scan mode.
3. Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track of the current folder (or the first
track of each folder) are played.
• When the scan mode is exited while scan
play is on, "SCAN" appears on the basic
display.
4. When you find the desired track (or fold-
er), press SCAN to turn scan play off.
The light goes off. The track (or folder) will
continue to play.
• If the scan mode is automatically canceled,
select the scan mode again.
Note:
• After track or folder scanning is finished, normal
playback of the tracks will begin again.
• If you turn scan play on during one-track repeat, the
repeat range changes to folder repeat.
P
ausing MP3/WMA playback
Pause lets you temporarily stop playback of the
MP3/WMA.
1. Press FUNC and then press PAUSE to
select the pause mode.
2. Press PAUSE to turn the pause on.
The light illuminates. Play of the current
track pauses.
• Press PAUSE again to turn the pause off.
• When the pause mode is exited while
pause is on, "PAUSE" is displayed in the
basic display.
Note:
• You can also turn pause on or off by pressing
PAUSE in the following display.
22

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido