Safety Instructions - Ribimex Ribitech PRDATR151 Manual De Uso Y Mantenimiento

III. SAFETY INSTRUCTIONS
Before using this product, read and understand all safety instructions.
Always follow the safety instructions to minimize risk of damages and injuries.
READ ALL THE INSTRUCTIONS BEFORE OPERATING THE PRODUCT
1. Keep work area clean
Cluttered areas and benches invite accidents and injuries.
2. Consider work area environment
Do not expose product to rain or to humidity or extreme temperatures.
Do not use product in damp or wet locations.
Keep work area well lit (natural light or sufficient artificial lighting).
Keep work area well ventilated.
3. Only well-instructed adults should operate the product. This product is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the product by a person
responsible for their safety.
4. Keep children away
Only operator should be in working area. Keep bystanders, children, and animals away from tool and work
area
Keep the product away from children or from their environment. Never allow children to operate the product.
Children should be supervised to ensure that they do not play with the product.
5. Store idle tools
When not in use, disconnect and store product and store it in a dry, high or locked up place, out of reach of
children.
6. Dress properly
Do not wear loose clothing or jewelry; they can be caught in moving parts.
Wear protecting hair covering to contain long hair.
7. Use protective equipment
Wear protective equipment appropriate to working conditions and work environment
Wear protective helmet, safety goggles, ear mufflers, face or dust mask, rubber gloves and non-skid footwear
to reduce the risk of personal injury during products use or manipulation.
8. Do not abuse the hoses
Never carry the tool by the hose or yank it to disconnect it from the air socket.
Keep the hoses away from heat, oil and sharp edges.
9. Do not overreach
Keep proper footing and balance at all times.
10. Maintain tool with care
Keep tool clean for better and safer performance.
Follow instructions for changing accessories.
Keep hoses dry, clean and free from oil and grease.
11. Disconnect intake hose form its air source when product is not in use, before servicing and when changing
compressed air tools.
12. Use of extension
Do NOT use extension hoses both on inlet and outlet.
13. Stay alert
Watch what you are doing. Use common sense.
Do not operate tool when you are tired, under the influence of alcohol, prescription medicines or drugs.
14. Check damaged parts
Before further use or reuse of the tool, tool should be carefully checked to determine that it will operate
properly and perform its intended function.