Ribimex Ribitech PRDATR151 Manual De Uso Y Mantenimiento página 13

For PRDATR151 and PRDATR201
Preparation: a carpenter pencil, a drill machine, a screwdriver (not provided) along with the provided 4 screws
and 4 wall plugs.
Fig.2: Using a carpenter's pencil and the wall bracket, mark on the wall the drilling positions.
Fig.3: Drill the holes and insert the wall plugs into the wall.
Screw the wall bracket to the wall with provided screws.
The mounting bracket is fitted with holes, for each there is a corresponding screw.
Each screw must be with spring washer and spacer.
Ensure that the wall bracket is properly and securely mounted.
Fig.4: Position the hose reel onto the wall bracket and lock it with the rod (5).
For PRDATRM16
Preparation: a carpenter pencil, a drill machine, a wrench; wall plugs and screws (not provided)
Using a carpenter's pencil, mark on the wall the position of the 4 notches of the support.
Drill the holes and insert the wall plugs into the wall.
Insert & partially tighten the screws in the plugs.
Place the support's 2 lower notches onto the lower set of screws; then insert the 2 upper notches to the upper
screws.
Tighten screws firmly.
Fig.5: Notches on the support
Fig.6: Wall mounted example.
4.2.2- Connect the intake hose
Attach the intake hose to an air supply with pressure service adequate with product's characteristics (see plate
on the product).
In order to avoid leakage, use PTFE (polytetrafluoroethylene) tape on the thread of the connector.
Remark: do not over tighten to avoid damaging the thread.
Tips
It is recommended that the reel be located indoors or a sheltered position to prolong its life.
The metal parts will deteriorate and rust in exposed locations.
Also the polypropylene parts will be affected when exposed outside, particularly under direct sunlight, which
will affect the life of the reel's housing and retracting mechanism.
V. OPERATION
5.1- Intended use
- The product is intended for domestic use indoors.
- The product is intended for carrying compressed air only.
- Do not use the product for applications for which it is not intended and for uses not described in the manual.
For ex.: it is not intended to carry oxygen, gas or other fluids (whether in gaseous or liquid stage), transport
and transfer of liquids.
- Any other use, other than that described in the instructions, is likely to damage the product and to put the user
in serious danger.
- Do NOT use product if it does not operate properly, has fallen, is damaged, do not attempt to repair it; return
it to your local dealer for servicing or repair; or to similarly qualified personnel to avoid any hazard; or discard
product properly.
- The product is not intended for artisanal, commercial, professional and / or industrial use (e.g. repair garages)