descrIpTIon of The ApplIAnce
A Lid
B Lock nut
C Ice bucket
D Container
E Motor body
F power cord + plug
g Support base
InsTAllIng The ApplIAnce
Remove all packing material from the components.
place the motor housing (E) into the opening on the support base (g): press down the motor housing.
Warning!
Before using the appliance, it is recommended to wash all removable parts that come into contact with the ice
(container, ice bucket, lock nut and lid) with water and common dishwashing soap.
InsTrucTIons for use
Warning!
the components assembly and disassembly must be carried out with the machine off and power cord unplugged
from the power outlet.
the container has a sharp blade inside. handle the container with care during assembly, disassembly and cleaning.
Before using the appliance, make sure to have correctly installed all components:
- place the container (D) on the motor housing (Fig. 2). Align the tab on the container with the seat on the machine body
(Fig. 3).
- place the ice bucket (C) in the container (Fig. 4).
- place the lock nut (B) into the hole on the ice bucket (Fig. 5). turn the nut clockwise to lock the ice bucket.
- place a glass on the support base (g), under the ice bucket.
If you use paper cups place them into heavier cups.
- Insert ice in the bucket (Fig. 6).
Never fill the ice bucket over the MAX level.
- plug into the mains socket.
- place the lid (A) on the container (Fig. 7). Align the tab on the lid with the seat on the machine body (Fig. 8).
- turn the lid counterclockwise. the tab on the lid enters into the machine body and activates the motor rotation (Fig. 9).
the bucket starts turning and crushed ice goes down into the glass. the lid must be kept locked with the hand (Fig. 10).
- to stop the rotation of the bucket turn the lid clockwise: bring the tab on the lid out of the machine body (Fig. 8).
- unplug it from the socket-outlet.
At the end of the operation ice residues could have been left in the bucket and in the container. Remove excess ice.
Warning!
the appliance must not be operated for more than 5 consecutive minutes. Wait for the motor to cool before perform-
ing a new operation.
When using the appliance for the first time, it may happen that give off a slight odour and a bit of smoke. this is normal and
is due to the fumes of oils for lubricating the appliance parts.
the sounds you hear during use are normal.
9