Table of contents
Supplied accessories
2
2
Safety precautions
Placement
Cover
Set the unit up on an even surface away from direct sunlight,
high temperature, high humidity, and excessive vibration. These
2
conditions can damage the cabinet and other components,
4
thereby shortening the unit's service life.
5
Place it at least 15 cm away from wall surfaces to avoid
distortion and unwanted acoustical effects.
5
Do not place heavy items on the unit.
6
Voltage
8
9
Do not use high voltage power sources. This can overload the
unit and cause a fire.
10
Do not use a DC power source. Check the source carefully when
10
setting the unit up on a ship or other place where DC is used.
11
AC mains lead protection
12
Ensure the AC mains lead is connected correctly and not
14
damaged. Poor connection and lead damage can cause fire or
15
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the
15
AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause
electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect the
unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs, disconnect
the AC mains lead and contact your dealer or an authorized service
center. Electric shock or damage to the unit can occur if the unit is
repaired, disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.