Connections - Panasonic SC-HC4 Instrucciones De Funcionamiento

Connections

Portable audio equipment
Portable audio player
Note
• Adjust the volume and sound quality of this unit and the other equipment. Reduce the level of input signal (for example, by switching
off the equalizer or reducing the volume) of the other equipment before connection. High levels of input signal will distort the sound.
• For details, refer to the instruction manual of the other equipment.
75Ω
FM ANT
1
Connect the FM indoor antenna.
1
Tape the antenna to a wall or column, in a position with the least
amount of interference.
Connect the AM loop antenna.
2
1
2
3
Black
White
Red
Keep the loose antenna cord away from other wires and cords.
Do not screw too tightly. Otherwise, the screwdriver goes around
in circle and cannot be fixed.
4
4
(Cords and equipment not included)
Plug type:
Ø3.5 mm stereo
AUX
LOOP EXT
LOOP ANT
AM ANT
GROUND
2
Adhesive tape
FM indoor antenna
AM indoor antenna
Use a Phillips-head
screwdriver, etc.
Stand the antenna
up on its base.
Click!
Start playback from the
portable audio source.
Headphones
AC IN
3
Connect the AC mains lead.
3
Connect the AC mains lead
after all other connections
are complete.
To household AC
mains socket
Note
To save power when the unit is not to be used for a long time,
unplug it from the household AC mains socket. You will need to
reset some memory items after plugging in the unit.
Insertion of connector
Appliance inlet
Approx. 6 mm
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing. However there is no problem
using the unit.
MAIN UNIT
➡
(not included)
Reduce the volume level and
connect the headphones.
Plug type: Ø3.5 mm stereo.
Note
• Avoid listening for prolonged
periods of time to prevent
hearing damage.
• Excessive sound pressure
from earphones and
headphones can cause
hearing loss.
Connector